AM2431: Workaround of Silicon Errata has been applied to MCU+ SDK ?

Hideaki Matsumoto

Part Number: AM2431

Hi,

The Silicon Errata document seems to be often revised. The workarounds of these errata will be/has been applied to MCU+ SDK ?

If some of them are applied, how can we know which errata workaround has been applied ?

I can't see that on the release note of SDK.

Regards,

Hideaki

over 3 years ago

0 Prasad Jondhale over 3 years ago

TI__Mastermind 27743 points

Hi Hideaki-San,

Good point. So far we didn't have a section in our SDK documentation and information about errata's with SW workarounds were communicated independently.

But it makes fully sense to have this in SDK documentation or as a part of MCU+ Academy.

I have filed a internal requirement to add this as a part of documentation. We will try to enable this in our next SDK release.

Below is JIRA ID for reference (please note this is Internal JIRA id so you won't be able to access, sharing just for future reference)

[MCUREQ-1365] docs - Include Errata <-> SW workaround information for all SOCs - Texas Instruments JIRA

Regards,

Prasad

0 Mari Tsunoda over 3 years ago in reply to Prasad Jondhale

TI__Expert 5040 points

Hi Prasad,

We received some feedback during our meeting with them, and it would be very helpful to be able to look up errata workarounds based on errata number in the documentation as well. Hope this helps in terms of possible ways to structure it.

Best,

Mari

0 Prasad Jondhale over 3 years ago in reply to Mari Tsunoda

TI__Mastermind 27743 points

Hi Mari-San,

Yes, that's the plan. I will update you once I hear from SW team on the documentation plan in SW docs.

Regards,

Prasad

Arm-based microcontrollers

Arm-based microcontrollers forum

AM2431: Workaround of Silicon Errata has been applied to MCU+ SDK ?