TMDSCNCD263: How to integrate Cdd module into the project ?

Palanikumar Raveendran

Part Number: TMDSCNCD263

Hii,

Currently, we are using MCAL_AM263x_08.06.02 package where Cdd_Uart module is available.

When I try to add Cdd_Uart module into my project , SchM_Cdd_Uart.h file is not generated. Is there any steps to be followed to integrate Cdd module ?

Thanks.

over 2 years ago

0 Kowshik Gudimetla over 2 years ago

TI__Genius 15435 points

Hi,

I am unsure SchM_Cdd_Uart.h file is generated through the GUI configurators or not. We usually generate the Cdd_Uart_Cfg.h, Cdd_Cfg.c file. Can I know what is the GUI configurator you're using? Is it Vector DE? or EB tresos?

Thanks

0 Palanikumar Raveendran over 2 years ago in reply to Kowshik Gudimetla

Prodigy 75 points

yeah, Cdd_Uart_Cfg.h, Cdd_Cfg.c file are generated using EB tresos . After that, I import it into vector davinci configurator , Uart module instance is not shown in tool .

+1 Kowshik Gudimetla over 2 years ago in reply to Palanikumar Raveendran

TI__Genius 15435 points

Hi Palanikumar,

Ahh, I see you're using Vector DE. For these files to be generated with the VectorDE, you need to wait for the MPP package to be released by vector with the latest AM263x_08.06.02 package.

Thanks

Arm-based microcontrollers

Arm-based microcontrollers forum

TMDSCNCD263: How to integrate Cdd module into the project ?