ADS1299EEG FE board

SATRAJ SINGH

How can interface ads1299board using stm32 with SPI communiction. how can i fatch the id of ADS1299EEG Board using SPI through stm32. kindly help in this .

over 2 years ago

0 ChienChun Yang over 2 years ago

TI__Mastermind 19815 points

HI,

We don't have knowledge and cannot support STM32.

You will need to check and follow the user guide and schematic to provide the necessary and correct power to the ADS1299EVM and then jump/connect the necessary wires from the desired signals pins to your host/master(e.g. STM32).

this thread may give you more step by step instruction and details.

https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1112648/ads1299eegfe-pdk-stuck-at-reading-registers

Thanks

Arm-based microcontrollers

Arm-based microcontrollers forum

ADS1299EEG FE board