stack ethernet protocol certified

Barbara Pinelli

Prodigy 30 points

Hello,

I have to realize a new software application with ehernet protocol fieldbus,

My application is a slave.

I need this protocol:

- Profinet RT

- Ethercat COE

- Ethernet IP.

My application is very simply: in SPI sets ouptuts written from PLC in fieldbus.

If I use the new CPU's AM26 o AM24 and your stack, I have to certified my application or the stack is just certiifed?

Do you provide the stacks or where should I download them?


Thanks,
Best regards,

Barbara

over 1 year ago

0 Nilabh Anand over 1 year ago

TI__Mastermind 49630 points

Hi Barbara

Good to know that you will be using SItarat devices. I would recommend to use AM243x as it has all the above mentioned protocols.

0 Nilabh Anand over 1 year ago

TI__Mastermind 49630 points

- Ethercat COE: EtherCAT Slave: Introduction

- Ethernet IP: AM243x INDUSTRIAL COMMUNICATIONS SDK: EtherNet/IP Adapter Demos

- Profinet RT: Link

Please refer to link above for more details on offering

0 Barbara Pinelli over 1 year ago

Prodigy 30 points

So,

if I well undestand, I don't have to certified my product because the stacks are certified. Is it correct?

May I know what of the protocols are implemented?

0 Nilabh Anand over 1 year ago

TI__Mastermind 49630 points

Barbara Pinelli said:
If I use the new CPU's AM26 o AM24 and your stack, I have to certified my application or the stack is just certiifed?

We have our stacks already certified(EtherCAT, EIP). Profinet is in process. If you want to keep the logo of the protocol you need to get the certification.

0 Nilabh Anand over 1 year ago in reply to Nilabh Anand

TI__Mastermind 49630 points

Barbara Pinelli said:
May I know what of the protocols are implemented?

I have provided the details on requested protocol for details on otehr supported protocol please see: AM243x INDUSTRIAL COMMUNICATIONS SDK: Industrial Communications Toolkit

Arm-based microcontrollers

Arm-based microcontrollers forum

stack ethernet protocol certified