• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 401 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

AM2634-Q1: AM2634-Q1 to AM263P4-Q1 Migration

AM263P4: Migration from AM2634-Q1 to AM263P4-Q1, Replacing QSPI with OSPI

John Martin4
Prodigy 80 points
Part Number: AM263P4
Other Parts Discussed in Thread: AM2634-Q1,

We are considering migration from AM2634-Q1 to AM263P4-Q1

Can we confirm since the QSPI needs to be replaced with OSPI, is the functional safety compliant MCAL available yet, and if not when?

Thanks,

John  

  • 0
    TI__Guru*** 135355 points

    Hello John,

    To clarify, is the question at hand whether an OSPI driver for MCAL is available or whether MCAL is available for AM263P as a whole?

    Best Regards,

    Ralph Jacobi

  • 0 in reply to Ralph Jacobi
    Prodigy 80 points

    Hi Ralph,

    I meant a FUSA/AUTOSAR compliant MCAL for the OSPI driver, assuming we carry over all the exisitng MCAL we have for AM2634-Q1. 

    I am thinking almost all the MCAL for AM263x which we have already integrated with Vector MICROSAR is compatible?

    We don't know for sure is if the MCAL is redone/overhauled for AM263P4 in such a way that we need to redo that work and you need to recertify/test the MCALs heavily?

  • 0 in reply to John Martin4
    TI__Mastermind 26145 points

    Hi John,

    We will have FuSa compliant MCAL drivers for AM263P4 available by Q4'24/Q1'25.

    John Martin4 said:
    I am thinking almost all the MCAL for AM263x which we have already integrated with Vector MICROSAR is compatible?

    You need to reach out to Vector for AM263P4 integrations with TI MCAL.

    John Martin4 said:
    We don't know for sure is if the MCAL is redone/overhauled for AM263P4 in such a way that we need to redo that work and you need to recertify/test the MCALs heavily?

    You can checkout our release available via My Secure SW and asses the same. We cannot comment on the rework from a 3P perspective.

    I hope you understand.

    Best Regards,
    Aakash