MSPM0L1306: MSPM0l1306:How to wake from standby1 mode

kamalesh patil

Part Number: MSPM0L1306

Tool/software:

How to wake from standby1 mode? Is it possible to reprogram or erase the controller in standby1 mode?

Note: Using J-Link debugger.

0 Zoey Wei over 1 year ago

Hi,

It is ok to connect MCU in standby1 with J-LINK debugger.

Which IDE do you use?

Regards,

Zoey

0 kamalesh patil over 1 year ago in reply to Zoey Wei

we are using both keil uVision5 and CCS IDE, What is the behavior in both IDE?

so, from standby1 mode device will wake up and be able to reprogram the software right?

0 Zoey Wei over 1 year ago in reply to kamalesh patil

It might need script to wake up MCU.

Regards,

Zoey

0 kamalesh patil over 1 year ago in reply to Zoey Wei

Thanks Zoey ,

I will try this solution .

Regards,

kamalesh

0 kamalesh patil over 1 year ago in reply to kamalesh patil

Hi Zoey,

I am using costumized hardware, Will this solution work with it?

Thanks,

Kamalesh

0 Zoey Wei over 1 year ago in reply to kamalesh patil

Hi,

Yes, but make sure you have connected power line clk/DIO and NRST with J-link.

Arm-based microcontrollers forum