AM2634: AM2634: How to update no of UDP socket count from 4 to 15

I have tried steps mentioned in this link. But I am facing issue with rebuilding libraries. Please let me know exact steps for rebuilding libraries. I have updated lwippools.h file but not able to build libraries.

Thanks!

lwippools.h file snapshot as shown above. 

Hi Ajit,

What exact error are you facing? Can you confirm if you have gmake or make installed in your system?

You can run "gmake --help" to check if you have gmake (on windows).

Incase you already have it, run the commands from the top level mcu_plus_sdk folder.

Regards,
Shaunak

Hi Shaunak,

I have tried to run above command in mcu_plus_sdk folder. got below error

Also, I am using freertos in project.

Hi Ajit,

Do you have CCS 12.70 installed? The error log says that CCS 1270 folder is missing.

Also, please replace the build commands to use FreeRtos as follows:

gmake -sj -f makefile.am263x lwipif-cpsw-freertos_r5f.ti-arm-clang PROFILE=debug
gmake -sj -f makefile.am263x lwip-freertos_r5f.ti-arm-clang PROFILE=debug
gmake -sj -f makefile.am263x lwip-contrib-freertos_r5f.ti-arm-clang PROFILE=debug

Regards,
Shaunak Deshpande

Hi Shaunak,

I have CCS1271 installed

Folder structure inside TI folder

Hi Shaunak,

All commands executed successfully and revuild the application. But I am not able to create 5 sockets a shown below

Serial terminal log output that shows socket 1 is not created..

Do I need to make any other updates like memory?

Hi Ajit,

Yes you need to update memory buffers but only if you face issue because of running out of memory. You can enter "lwip_stats" in your CCS expressions and check the information there.

Other details that need to be taken care-of have been discussed in the thread itself: https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1393963/am2634-how-to-test-20-port-in-udp---am2634

Regards,
Shaunak

Hi Shaunak,

I have tried all the steps but still it's not working. Is possible to have teams meeting to discuss and resolve this?

Thanks!

Hi Ajit,

Let's track the thread here itself. Since the other thread (https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1396342/am2634-how-to-update-no-of-udp-socket-count-from-4-to-15/5343921#5343921) is duplicate im closing it.

Regards,
Shaunak

Sure!

Closing this thread based on our alignment over meeting

Sure Thanks Shaunak!

Can you please do a favor? check below thread on I2C implementation and assign it experts?

e2e.ti.com/.../am2634-not-able-get-i2c-output-on-scl-and-sda-lines-for-i2c2

Hi Ajit,

The query has been assigned to an expert. The expert is in Dallas time-zone and might not be available right now.

Regards,
Shaunak