Tool/software:
I'm trying to Implement FAPI Example to my old application. for that how i need to create separate memory in .cmd file is there any example. i added suggested linker files and include files. only thing im unable to write the data to particular sector .
thankyou,
Suguresh M
Hi Suguresh,
TMS570LS3137 have 3 flash banks (Bank-0, Bnak-1 and Bank-7) right?
If your code is executing on bank-0 then you can easily write on bank-1 or bank-7 without any additional modifications on cmd file. You can refer below two examples for this:
In above example i am writing on bank-7.
5661.FAPI_BANK1_TEST_LS3137.zip
In above example i am writing on bank-1.
But if you want to write in same bank where the code is executing for example in this case Bank-0, in this situation you should need to copy the FAPI library from flash to RAM before starts writing, to understand this please refer below thread:
For this i don't have direct example on TMS570LS3137, instead of i had an example on RM46:
So please take above example as reference and do the modifications in according to it on TMS570LS3137.
--
Thanks & regards,
Jagadish.
