MSPM0G3107-Q1: MSPM0G3107-Q1

Pierre-noel Bouteville

Part Number: MSPM0G3107-Q1
Other Parts Discussed in Thread: MSPM0G3507

Tool/software:

Sorry for delay but I'm not agree with you.

Analogic capture show that ADC continue to working add sample between trigger

in yellow(D4) from PWM and in brown (D1) ADC interrupt, so you can see ADD continue working between trigger.

0 Helic Chi 9 months ago

Do you want to PWM fully control the start conversion of ADC?

One raising edge of PWM(D4) follow only one ADC interrupt(D1)?

Since you mention the use case in previous thread that:

This ADC is for BLDC current sens, so it should be synchonized with PWM.

I recommend you using this example:

C:\ti\mspm0_sdk_2_03_00_07\examples\nortos\LP_MSPM0G3507\driverlib\adc12_triggered_by_timer_event

Regards,

Helic

0 Pierre-noel Bouteville 9 months ago in reply to Helic Chi

Sorry but mspm0_sdk_2_03_00_07 not exist, lastest is Version: 2.02.00.05Release date: 30 Aug 2024

0 Helic Chi 9 months ago in reply to Pierre-noel Bouteville

You can use 2.02.00.05, it's OK.

Regards,

Helic

Arm-based microcontrollers forum