AM2434: am2434

Hi Baruch,

Thanks for your query.

You are looking for 2 Ethernet port with RGMII-1G spped ?

Each port will be connected with single application running on R5F_0_0 ?

or

2 Ethernet port having traffic from 2 R5F cores (R5F_0_0 and R5F_0_1) ?

Please refer below SDK example and let me know if you need further help ?

AM243x MCU+ SDK: Ethernet and Networking

Regards

Ashwani

Hן Ashwani

I asked a different question. Is there a way to connect 3 external channels to a AM2434 SWITCH.

My application requires two standard 1Gb Ethernet ports and one USXGMII at 1Gb. At any time i uses only 1 IP.

thanks 

Baruch

Baruch Einziger said:

3 external channels to a AM2434 SWITCH

Means,

• AM243x working as Switch having 3 external ports ?
• You need packets can be switched from any one to any other port ?

Baruch Einziger said:

My application requires two standard 1Gb Ethernet ports and one USXGMII at 1Gb

2 standard Ethernet ports definetly possible. I am check internally for USXGMII support ?

Regards

Ashwani

For the  USXGMII at 1Gb i connect it with a phy. now i am using monolithic ethernet switch. I ask if there is a way to ignore the hardwire switch for my application.

Best Regards

Baruch