MSPM0G3507: Where to get armXDS.dll

Jerry Kuo

Expert 4340 points

Part Number: MSPM0G3507

Tool/software:

Hi team,

My customer use IAR 9.50.2 to develop M0G3507 FW. While debugging in low power mode, they meet below error.

They refer to below links. It needs to have armXDS.dll . Please instruct where to get this file (armXDS.dll) ?

https://dev.ti.com/tirex/explore/node?node=A__ANSP7A0xhIl-tGV4vBLoMg__MSPM0-SDK__a3PaaoK__LATEST

https://dev.ti.com/tirex/explore/content/mspm0_sdk_2_03_00_07/docs/english/tools/iar_ide_guide/doc_guide/doc_guide-srcs/iar_ide_guide.html#known-issues-and-frequently-asked-questions-faqs

Thank you.

8 months ago

0 Cash Hao11 8 months ago

TI__Mastermind 46685 points

Hi Jerry,

I think the armXDS.dll can be found in a latest version of IAR like v9.60.2. However, I checked with the team. No one has installed this new version on their PC. So, it would need to check with ARM to ask if they can send it to your customer.

Best regards,

Cash Hao

0 Poca Cheng 8 months ago in reply to Cash Hao11

Prodigy 10 points

Hi Cash,

I 'm the customer of Jerry.

How can I contact ARM?

Thank you

0 Jerry Kuo 8 months ago in reply to Poca Cheng

TI__Expert 4340 points

Hi Poca,

I check the latest version IAR ARM is 9.60.3. Would you check the latest IAR version ?

0 Gary Liao 8 months ago in reply to Jerry Kuo

TI__Expert 6270 points

Hi Cash and Jerry,

Cash Hao11 said:
So, it would need to check with ARM to ask if they can send it to your customer.

The latest IAR version is v9.50.2 or v9.50.4. They don't have the 9.60.3, could we send the v9.60.2/v9.60.3 IAR ARM to the customer?

Without this, they can't operate the debug tool normally.

0 Cash Hao11 8 months ago in reply to Gary Liao

TI__Mastermind 46685 points

Hi,

I installed v9.60.3 on my PC. And find this .dll file.

Please use it and try if it can work on your side. Change the .txt to .dll on your side.

armxds.txt

Best regards,

Cash Hao

0 Jerry Kuo 7 months ago in reply to Cash Hao11

TI__Expert 4340 points

Cash Hao11 said:
Please use it and try if it can work on your side.

Do you mean with "IAR v9.60.3 and its armXDS.dll", M0G can enter low power mode under debug ?

My customer try with "IAR 9.50.2 + armXDS.dll from 9.60.3" and M0G cannot enter low power mode under debug. They have the authorized license of IAR 9.50.2 and follow the instructive steps from E2E

0 Cash Hao11 7 months ago in reply to Jerry Kuo

TI__Mastermind 46685 points

Hi Jerry,

Yes, according to below information. Using IAR v9.50.2 + armXDS.dll and the .dmac file from the latest SDK should support M0 MCU enter low power mode while debugging.