• State
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 122 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SYSCONFIG: AM64xx clock tree tool

SYSCONFIG: Clock tree import

Christian Kohler25
Intellectual 290 points

Part Number: SYSCONFIG

Tool/software:

Hi.

How can I import the a register dump to the tool. When I try to import, I see the differences to the current register settings in the rd1 preview, but the imported information are not updated to the GUI.

Thank you!

  • 0
    TI__Guru 53113 points

    Hi,

    Currently, I believe we do not support importing these registers. Clock Tree Tool is currently being used to analyze the clocking architecture and check the hsdiv values to see different frequency combinations based on the use case.

    Regards,

    Vaibhav