AM2634-Q1: Using J-Link segger debugger with CCS Ide and Uniflash GUI

Nilabh Anand

Guru 59790 points

Part Number: AM2634-Q1
Other Parts Discussed in Thread: UNIFLASH

Tool/software:

Hi Experts,

I see on the segger website that they support AM263x and AM261x:

But when I am trying to debug either of these devices using CCS theia or CCS 12.8.1. I am not able to find them.

We have few customer asking for this support, Could you please help with this.

I also have question on how I can use Uniflash GUI with Segger-Jlink. As I see in Uniflash website segger support is available:

0 Ki 11 months ago

Hello,

Nilabh Anand said:
But when I am trying to debug either of these devices using CCS theia or CCS 12.8.1. I am not able to find them.

The latest CCS 20.2.0 comes with J-Link software version 8.34 while AM263x support was added in version 8.38. Hence why AM263 is not appearing for J-Link in CCS/UniFlash. We will pick up a newer J-Link package for the next releases of CCS and UniFlash.

Thanks

0 Nilabh Anand 11 months ago in reply to Ki

0 Ki 11 months ago in reply to Nilabh Anand

Nilabh Anand said:
Is it possible for me to manually update the segger package

Probably. I would check with SEGGER on instructions on how to do this.

Arm-based microcontrollers forum