TPS653860-Q1: Safe 1 and safe 2 pin usage

Jayakeerthana P

Hi team,
Whether the wake 1 and wake 2 pin should always be high?What is wake 2 pin is left open since igntition through CAN is not available?

10 months ago

0 Jayakeerthana P 10 months ago

Intellectual 335 points

Query is related to Wake up pin of PMIC

0 Michael Hernandez 10 months ago

TI__Expert 7340 points

Hi Jayakeerthana,

As this is an NDA device I can't go into too much detail on how the device works on the public forums. Please refer to section 8.4 of the datasheet.

Best,

Michael Hernandez

0 Jayakeerthana P 10 months ago in reply to Michael Hernandez

Intellectual 335 points

Hi,
Is there any separate forum or page available to discuss on this or we have to do via mail communication. Since we already processed NDA with TI

0 Michael Hernandez 10 months ago in reply to Jayakeerthana P

TI__Expert 7340 points

Hi Jayakeerthana,

Typically you would reach out to your local representative and they would handle the communications between us. Even if you reached out to me directly I would have to pull in other to check the NDA paperwork.

Best,

Michael Hernandez

Arm-based microcontrollers

Arm-based microcontrollers forum

TPS653860-Q1: Safe 1 and safe 2 pin usage