MSPM0L1228: J-Link vs XDS110 Debugger Interrupt Handler

Phillip

Part Number: MSPM0L1228
Other Parts Discussed in Thread: MSPM0L2228

Looking at the following issue, I am running into the same problem: https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1438366/mspm0l1228-systick-callback-won-t-called

Has this issue been resolved? Does the MSPM0L1228 interrupt handler behaviour still function differently depending on the debugger used for the project?

I am seeing this issue on both the MSPM0L1228 on our custom dev board and the MSPM0L2228 launchpad dev board.

1 day ago

0 Phillip 1 day ago

Prodigy 10 points

Diego Abad Sajamin Diego, including you on this issue since it appears you raised a jira bug on the previous thread

+1 Diego Abad Sajamin 1 day ago in reply to Phillip

TI__Mastermind 22512 points

Hi Phillip,
We tried re-creating this issue from my side, and my team wasn't able to replicate it, and neither was I. This specifically targer SEGGER JLINK btw. The fix seems to be to update the CCS to the latest version.

Best Regards,

Diego Abad

0 Phillip 1 day ago in reply to Diego Abad Sajamin

Prodigy 10 points

Ok, we are using CCS 12.8.1, are you using CCS 20.5.1 ?

+1 Phillip 1 day ago in reply to Phillip

Prodigy 10 points

For future reference this issue of the debugger choice affecting the interrupt handlers occurs in CCS 12.8.1 but is resolved by using CCS 20.5.1

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0L1228: J-Link vs XDS110 Debugger Interrupt Handler