Unable to install Stellaris ICDI drivers on Windows 10

Hi Tim,

I have windows 10 but I installed the drives before in windows 8. In google users reporting this error say that disabling driver signature worked. Are you sure that the enforcement is turned off? (you could be doing it but it just doesn't turn off).

Try this out:
www.technipages.com/enable-disable-device-driver-signing

Hi Tim,

I am having the same issue and have also tried disabling driver signature enforcement with no luck.

Have you by any chance found a solution to the problem?

Hello Jason,

We are working on the solution to this known problem.

There is a rather not so fancy workaround though. If you can install Uniflash on your win 10 machine and pick the driver for ICDI and COM port from the Uniflash it will work.

Regards

Amit

I have windows 10 and started off using energia. I am now trying to get CCS to work. I have the drivers installed by energia. in device manager
Ports - CC3200LP Dual Port(COM31)
Universal Serial Bus Controllers - CC3200LP JTAG Port A
CC3200LP UART Port B
Do I need to uninstall these drivers and add the Stellaris drivers?
Is this issue fixed in windows 10 yet?

Hello Stuart

Guess, you missed the latest update...

e2e.ti.com/.../485157

Anyways the drivers are needed for TM4C devices when being used with CCS, IAR, and other IDE.

Regards
Amit