regarding timer1 as interrupt

5732.Startup code for use with TI.docx3404.WE CANT ASSING TIMER B AS INTERRUPT IN 32 BIT MODE.docxplease ignore last thread...

the new post what i sent regarding the usage of timer1 as interrupt generator....i just done modulation in the program lab4 that is i have replaced timer0 by timer1..

i think this new attachments will be clear for you....

Hello Mohammad,

There are some issues as I see

1. In the startup file the Timer0IntHandler is mapped to the interrupt vector table and Timer1IntHandler is "extern"
2. The clock to Timer 0 is enabled and the Timer 1 is being accessed. This will result in Bus Fault

Regards
Amit

yes sir i overcame from that...

Now i am trying with timer1B......As we know it works with 16 bit format.Can u tell me what i have done is right or not.

thank u

MAIN.docxSTARTUP.docx

Hello Mohammad

Please have a look at the example code

D:\ti\TivaWare_C_Series-2.1.2.111\examples\peripherals\timer\periodic_16bit.c

use of Sub timers require the split mode and the timer configuration specific to the split mode

Regards
Amit