how to update application by iic boot loader?

jinjin cui

Prodigy 10 points

I want to update application by iic boot loader.

what kind of command order should I send to iic boot loader?

step1 :send COMMAND_DOWNLOAD command?

step2:The application binart use "send COMMAND_SEND_DATA command " to boot loader?

over 9 years ago

0 Amit Ashara over 9 years ago

TI__Guru**** 244400 points

Hello Jinjin,

Please go through the following forum post on Serial Boot Loaders.

e2e.ti.com/.../423619

Regards
Amit

0 cb1_mobile over 9 years ago in reply to Amit Ashara

Guru 117855 points

Prior to, "Going thru" the (prominent) sticky post our friend should (perhaps), more widely, "open his eyes." Inexcusable to "miss" - that which you "hunt" - when the prey stands, "front/center - directly w/in your sights!"

If not alerted to this, "investigatory defect" - how possibly can poster succeed?

(apologies to Aesop)

Arm-based microcontrollers

Arm-based microcontrollers forum

how to update application by iic boot loader?