LM Flash with I-jet?

Dave Hohl

Other Parts Discussed in Thread: SEGGER

Is it possible to configure LM Flash to program a Tiva processor using the IAR I-jet? If not, does anyone know of any free programmers that might support the I-jet?

Thanks,

Dave

over 9 years ago

0 Amit Ashara over 9 years ago

TI__Guru**** 244400 points

Hello Dave

The following application note (forum sticky link) gives a good picture of what is supported and what is not for programming TM4C12x devices over JTAG.

e2e.ti.com/.../536896

As far as I know, it is not supported. IAR/Segger should be able to provide with that info,

Regards
Amit

0 Dave Hohl over 9 years ago in reply to Amit Ashara

Expert 2315 points

Thanks, Amit. The table in the app note shows that I-jet is not supported by LM Flash. Oh well.

Regards,

Dave

0 Amit Ashara over 9 years ago in reply to Dave Hohl

TI__Guru**** 244400 points

Hello Dave,

I would still suggest to check with IAR/Segger on other tools/utilities that they may have

Regards
Amit

0 Dave Hohl over 9 years ago in reply to Amit Ashara

Expert 2315 points

Yes, I have already contact IAR about it.

Regards,

Dave

Arm-based microcontrollers

Arm-based microcontrollers forum

LM Flash with I-jet?