Other Parts Discussed in Thread: HALCOGEN
Hi All,
i worked on STN2120 IC. 0333.obd_interconnect_board.pdf
See this documents. here STN2120 itself will chose the HS/MS/SW/J1850/KL CAN and accordingly there transceivers are connected ahead of there pins. by Superior automatic protocol detection algorithm they can able to do a automatic baud rate selection and automatic 11/29bit selection.
OR
we can take it example of ELM327, which will support Automatically searches for Protocol. https://www.elmelectronics.com/wp-content/uploads/2016/07/ELM327DS.pdf
So, my question is that by using TMS470MF06607 can we do the same things like auto baud rate selection and auto 11/29bit or https://www.scantool.net/scantool/downloads/206/stn21xx_ds_c.pdf other protocols they mentioned here.
can we identify by using TMS auto baud rate?
Thanks,
Anil.