TMS320F28379D: XCP for calibration and measurement

Jay Amlani

Part Number: TMS320F28379D

Hi,

I am trying to work on a calibration and measurement project, I need to implement XCP on TI board. is there any tutorial video or document available on how to go about doing this?

over 2 years ago

+1 Arjan Oskam over 2 years ago

Intellectual 510 points

Hi Jay,

I'm working on the same subject on the F28388D, XCP on TCP/IP. As far as I know, TI doesn't provide any XCP driver libraries, so you will need to get it elsewhere or create it yourself.

Currently I'm evaluating Vector's XCP Basic Driver, and will do the same with similar products by ETAS and dSPACE.

Hope this helps.
Kind regards,
Arjan

0 Ashwini Athalye over 2 years ago in reply to Arjan Oskam

TI__Expert 7695 points

Hi Jay, Arjan has provided the right input. TI does not provide XCP drivers. Simma a 3P does offer a solution. Other options are as mentioned above, use Vector/ETAS packages as starting point.

+1 Jay Amlani over 2 years ago in reply to Arjan Oskam

Prodigy 115 points

Hi Arjan Oskam,

Yeah, I found the same thing. TI does not provide xcp library. I am currently evaluating ETAS XCP driver.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28379D: XCP for calibration and measurement