TMS320F28388D: SYSCONFIG GPIOs configuration issue

Ashushree Fulzele

Part Number: TMS320F28388D
Other Parts Discussed in Thread: SYSCONFIG

Hi there,

While configuring any GPIOs in SYSCONFIG, I am not able to see GPIOs PIN numbering, instead it shows the CPU PIN number.

I need GPIOs numbers or both to be seen for simplicity.

Is this any CCS version issue?

Can you please help me with it. Attached image below.

Thanks

over 2 years ago

0 Peter Luong1 over 2 years ago

TI__Genius 13701 points

Hi Ashushree,

There is an option to enable the GPIOs numbers. Go to the settings icon (triple dot) in the top right corner, click Preferences & Actions. Then on Device Pin Label, enable the Device Pin Name option. Then you will be able to see GPIO numbers

Regards,

Peter

0 Ashushree Fulzele over 2 years ago in reply to Peter Luong1

Prodigy 10 points

Thanks Peter, for your quick response.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28388D: SYSCONFIG GPIOs configuration issue