- Ask a related questionWhat is a related question?A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
Hi Vivek,
I measured on the XRS pin with the oscilloscope while the debugger was connected to the device.
Here you can see the wiring diagram and my measured signal.
I measured on the XRS pin even without a debugger attached. The signal is high until I hit the reset button (S1). Then the signal goes to low.
The same thing happened to me a few weeks ago with another device. What could be the reason for the microcontroller to jump into the low-power mode?
Regards,
Stefan Mayer
