TMS320F28379D: Unable to Run the Code in FLASH Memory

Anmol Meshram

Part Number: TMS320F28379D

Tool/software:

Hi everyone,

I'm encountering an issue with running my code on CCS in flash memory. When I attempt to run the code in flash memory, I get an error (please see the attached image for details). However, the same code runs successfully when executed in RAM memory.

Has anyone experienced a similar issue or have any insights into what might be causing this problem? What steps can I take to resolve this and successfully run my code in flash memory?``````

Thanks in advance for your help!

10 months ago

+1 Allison Nguyen 10 months ago

TI__Mastermind 20740 points

Hi Anmol,

There are a few things to keep in mind when using Flash vs. RAM - please review the below threads where some of these items are addressed to see if any of them apply/aid your situation.

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/757590/faq-f05-flash-how-can-i-debug-code-that-does-not-run-standalone-without-code-composer-studio-attached
https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1323905/faq-how-to-correctly-migrate-an-application-from-ram-to-flash
https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/878674/faq-flash---how-to-modify-an-application-from-ram-configuration-to-flash-configuration

Best Regards,

Allison

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28379D: Unable to Run the Code in FLASH Memory