C2000™︎ microcontrollers

C2000 microcontrollers forum

New dsp processor

Ubaid Butt

Prodigy 30 points

Other Parts Discussed in Thread: TMS320F28335

Hi ,

We own a TMS320F28335 DSP board and recently the processor was damaged. We have got a replacement for the processor now but aren't sure what orientation the processor is to be put inside the socket on the board. The details mentioned on the processor chip are

TMS320

F28335PGFA

CA-2AAGQ7W

G4

Two images of the DSP board have been attached for your reference.

Thank you so much for your help.

over 12 years ago

0 Igor Gorbachev over 12 years ago

Guru 20525 points

Hello!

I didn't work with this board, but I would prefer to set thus:

Regards,

Igor

0 ChrisClearman over 12 years ago in reply to Igor Gorbachev

TI__Guru** 118740 points

agree, pin 1 in bottom right corner as your picture is aligned.

also agree it is NOT clear in the eZdsp UG.

I used figure 2-24 from the eZdsp UG (from spectrum digital) to find XCLKOUT and get the orientation.

0 Lori Heustess over 12 years ago in reply to ChrisClearman

TI__Guru* 90955 points

Yes the arrow marks pin 1 as the previous post indicated.

0 Ubaid Butt over 12 years ago in reply to Igor Gorbachev

Prodigy 30 points

Thank You so much for your help. I tired it and it worked