Necessary Hardware and software to use with the TMS320F2812

michel joel

Other Parts Discussed in Thread: TMS320F2812

Hi,

i have a design in Simulink. Now i want to test it in a microcontroller. I'm searching for a microcontroller. I found that the TMS320F2812 can be used for my application.

I'm on the step to order it. I don't if i must buy also the TMS320F2812 eZdsp. Is the TMS320F2812 eZdsp necessary also? Where is the difference between the TMS320F2812 eZdsp and TMS320F2812?

Please could you advise me which connector can i use to connect the TMS320F2812 to my PC? Or what is the necessary hardware and software can i order with microcontroller to let it run perfectly?

I'm asking that because i don't have any experience with microcontroller.

Regards,

M.J

over 12 years ago

0 Gautam Iyer over 12 years ago

Guru 192875 points

Hi,

You'll be needing an emulator ie XDS100 to connect your mcu with PC. Using a Kit would be easier to start and implement your project; so go for it!

Regards,

Gautam

0 michel joel over 12 years ago in reply to Gautam Iyer

Prodigy 70 points

hi Gautam,

do you mean that if i buy a kit i will receive the complete necessary set (hardware, software and cable) for implementing my real time testing?

Please could you send me a links with the kit?

Regards,

M.J

0 Gautam Iyer over 12 years ago in reply to michel joel

Guru 192875 points

MJ,here's the kit you're looking for:

http://www.ti.com/tool/tmdsezd2812

do you mean that if i buy a kit i will receive the complete necessary set (hardware, software and cable) for implementing my real time testing?

Yup, this will have everything. You just have to make use of the sample codes and develop your code.

Regards,

Gautam

C2000™︎ microcontrollers

C2000 microcontrollers forum

Necessary Hardware and software to use with the TMS320F2812