ePWM in simulink

Muhammed Adel

Intellectual 265 points

Hello all ,

Please how can i change the duty of the epwm to 4 sec using the epwm block in simulink ?

over 8 years ago

0 Brian McKay over 8 years ago

Mastermind 9005 points

Below is a link to the MathWorks Documentation on the ePWM block, but it might be a bit different depending on your MathWorks software release and the C2000 chip you are using.

MathWorks login may be required:

https://www.mathworks.com/help/supportpkg/texasinstrumentsc2000/ug/c280xc2802xc2803xc2805xc2806xc2833xc2834xf28m3xf2807xf2837xdf2837xsepwm.html

And here is a link to more info on MathWorks support for C2000:

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/484814

-Brian

0 Muhammed Adel over 8 years ago in reply to Brian McKay

Intellectual 265 points

Thanks

C2000™︎ microcontrollers

C2000 microcontrollers forum

ePWM in simulink