• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 3844 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

how to implement space vector modulation in F28335?

suren nukala
Prodigy 35 points
Other Parts Discussed in Thread: CONTROLSUITE

Hi

I use TMS320F28335 DSP for my control application. I know generation of gate signals using epwm module.

How to implement space vector modulation in 28335? Is there any built code like in 2812? or do I need to depend on epwm?

Any help is greatly appreciated.

  • 0
    TI__Guru** 118790 points

    F28335 for is supported from http://www.ti.com/controlsuite for motor control.

    install, choose the high voltage kit, which is the only kit that ships with F28335 controlCARD, and launch the controlSUITE Desktop.  look under kits, high voltage kits.

    you can also go directly to the Libraries section and look at the motor control library, under drivers.

    www.ti.com/motorcontrol