Dear all:
When I use TMS320F28377 ,there were some issuses as below:
1st: I want to use DCSM block to set a password for on chip codes; cmd file configured as cmd-1 and cmd-2.jpg DCSM file configured as dcsm-block1.jpg and dcsm-block2.jpg
cmd-1.jpg
cmd-2.jpg
dcsm-blcok1.jpg
dcsm-block2.jpg
2st : CPU was working normal, CLA was abnormal: interrupt is not work, but MIFR reg:bit0 of CLA was set to 1, it seems cla is working! but the address in MPC reg can't point to correct task address.
because of the task address is not correct ,the interrupt function can't be executed.
pls give me some advises ,thanks!
