CCS/TMS320F28027F: ERROR The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation.

Tyler Hanzlik

Part Number: TMS320F28027F
Other Parts Discussed in Thread: LAUNCHXL-F28027F, TMDSCNCD28027

Tool/software: Code Composer Studio

Hi,

I am having trouble executing lab 1 debug probe. I get this error:

C28xx: Error connecting to the target: (Error -1135 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.1.0.00007)

I am pretty sure I have all my switches set correctly, and it looks code composer debugger can't talk to the board. But I have board power (LED's light up). I am pretty sure my configuration settings are correct.

Do you have any suggestions on what I should try next?

Best,

Tyler

over 6 years ago

0 Vivek Singh over 6 years ago

TI__Guru** 113665 points

Tyler,

We'll have someone from TI reply you soon on this issue.

Regards,

Vivek Singh

0 MatthewPate over 6 years ago

TI__Guru* 77360 points

Tyler,

Can you comment on which TI tool you are using, either the LAUNCHXL-F28027F or the TMDSCNCD28027? That will help narrow down things to try.

Also, this app note has a step by step approach to debugging these initial connection issues if you want to take a look in parallel.

http://www.ti.com/lit/spracf0/

Best,
Matthew

0 MatthewPate over 6 years ago in reply to MatthewPate

TI__Guru* 77360 points

Tyler,

Checking back to see if you have been able to resolve your issue. I'm going to mark as TI thinks resolved, but if you still have issues, just reply back to the thread and it will alert me.

Best,

Matthew

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28027F: ERROR The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation.