• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 83 subscribers
  • Views 334 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMS320F28379D: TMS320F28379D

CCS/TMS320F28379D: TMS320F28379D

robin gangopadhya18
Mastermind 6326 points
Part Number: TMS320F28379D
Other Parts Discussed in Thread: CONTROLSUITE

Tool/software: Code Composer Studio

I am trying to work with TIDUCT9 document which gives design guidelines for 2 phase interleaved LLC converter using TMS320F28379D.

Pl see the attached file that shows the problem I am having with it.

Any help will be highly appreciated.

-robin

hv_2ph_llc_setup2.pdf

  • 0
    TI__Mastermind 21305 points

    Robin,

    Looking at page 2 of your document, it looks like you don't have the GUI Composer Runtime v1 app installed from the CCS App Center. You should install that package via the app center. You can access by selecting Help -> App Center from within CCS.

    Regards,

    Ozino

  • 0 in reply to Ozino Odharo
    Mastermind 6326 points

    Ozino

    I got stuck by not getting my password reset won't allow me to log back in ...until today.

    While I was successful importing prj  HV-2phllc project  & then following your alert about GUI composer v1 in CCS9

    Since then I switched to CCS8.2 discarding CCS9

    Reinstalled control Suite in CCS8

    Tried to import project from CCS8 but I get an error this time.

    Pl see attached ppt for the error. 

    Also I see only greyed out selection if Install of GUI from inside CCS8

    What could I have missed again ?

    Any help will be very appreciated.  I am stuck real bad. No progress for 2 or 3 days.

    thnx

    robinhv2ph_llc_ import_issues.pptx

  • 0 in reply to Ozino Odharo
    Mastermind 6326 points

    Ozino:

    Good news: I am exactly where the document TIDUCT9 shows I should be in terms of hardware set up & software set up.

    SO a few things got fixed

    - my password is active & I can log in/log out.

    - I had to uninstall all previous versions ( there were 6, 8.1, 8.2 9 etc) with ControlSuite as well.

    download again & do a clean install of 8.2 CCS. I finally found the GUI runtime support as well. Installed that successfully.

    - Then imported HV2PHLLC project with the GUI visible in the CCS window.

    So no action is needed in response to my earlier postings  at this  time & at this level. Let me see how far I cab go from here following TIDUCT9

    robin

  • 0 in reply to robin gangopadhya18
    TI__Mastermind 21305 points

    Hi Robin,

    Glad to hear that you figured out the issue. Thanks for sharing your feedback.

    Regards,

    Ozino