Other Parts Discussed in Thread: UNIFLASH,
Tool/software: Code Composer Studio
Hi,
I am using the following post-build command to generate the BIN file from the OUT file. This command works, but the resulting BIN file produces a verification error when using it with UniFlash:
"${CCE_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd.exe" "${CG_TOOL_ROOT}/bin/armhex.exe" "${CCE_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin.exe"
UniFlash reports:
File: C:/.....bin: a data verification error occurred, file load failed.
The OUT works just fine, though. So does the BIN file for the C28 processor (using a different post build command, of course).