TMS320F280024: TBPHS value for EPWM1 and EPWM2 CTR synchronization

Hitoshi Sugawara

Mastermind 19700 points

Part Number: TMS320F280024

Hi Experts,

I would like to completely synchronize the CTR for EPWM1 and EPWM2.
If EPWM1 is master and EPWM2 slave, should it be TBPHS =2 for EPWM2?

I have checked the thread below:

CCS/TMS320F28377D: PWM sync operation - C2000 microcontrollers forum - C2000™︎ microcontrollers - TI...

e2e.ti.com

Part Number: TMS320F28377D Tool/software: Code Composer Studio Hi community, I wan PWM1, PWM2, PWM3, and PWM11 be in phase together (synchronous operation with

Thank you for your kind check.
Best regards,
Hitoshi

over 5 years ago

0 Subrahmanya over 5 years ago

TI__Mastermind 24095 points

Hi,

That's correct.
Thread you linked above has all the details. Are you seeing any issue with TBPHS=2?

0 Hitoshi Sugawara over 5 years ago in reply to Subrahmanya

TI__Mastermind 19700 points

Hi Subrahmanya,

Thank you so much for your quick support.

Best regards,
Hitoshi

0 Subrahmanya over 5 years ago in reply to Hitoshi Sugawara

TI__Mastermind 24095 points

Hi,

Thank you! Good to know that your issue is resolved.
Let us know if yo u need any additional help.