• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 81 subscribers
  • Views 2314 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HSEC180 Docking Station baseboard Schematics

John Bledsoe
Intellectual 280 points
Other Parts Discussed in Thread: CONTROLSUITE

I have a TMDXDOCK28377D Control Card with Docking Station.  I am looking for the Schematics for the docking station.  I found one reference that stated that they are in ControlSuite, if they are, I cannot access them. 

I recently upgraded ControlSuite and now I cannot access any Control Card web pages, I get the following for all controlCARD hardware files.

Can’t reach this page

  • Make sure the web address is correct
  • Search for this site on Bing
  • Refresh the page

I tried to replace my XDS100v2 JTAG adapter with the XDS110 JTAG adapter.  It works with the TMDXDOCK28377D, but does not work with my custom board.  The XDS100v2 will work with the custom board.

  • 0
    TI__Guru 51345 points
    You're looking for schematics for the docking station itself, correct? I can find schematics for controlCARDs, but none for the docking station. I'll ask around and see if do provide them.

    It's not clear to me which webpage you're referring to. I'm not having any trouble browsing them in my installation. Maybe send me a screen capture? In the meantime, you can browse the schematics and other docs by navigating the controlSUITE\development_kits\~controlCARDs folder.

    Can you give me more details about the emulator issue? Are you getting an error message? What does it say?

    Whitney
  • 0 in reply to Whitney Dewey
    Intellectual 280 points
    Yes, schematics for the docking station, specifically the JTAG connector on the docking station.

    I think I may have a bad install of controlSUITE, I will uninstall and reinstall to see if it fixes the links.

    The XDS110 with CCS version 7 works fine with the controlCARD.
    For my custom board I get the following error when I test the connection

    -----[An error has occurred and this utility has aborted]--------------------
    This error is generated by TI's USCIF driver or utilities.
    The value is '-233' (0xffffff17).
    The title is 'SC_ERR_PATH_BROKEN'.

    The explanation is:
    The JTAG IR and DR scan-paths cannot circulate bits, they may be broken.
    An attempt to scan the JTAG scan-path has failed.
    The target's JTAG scan-path appears to be broken
    with a stuck-at-ones or stuck-at-zero fault.
  • 0 in reply to John Bledsoe
    TI__Guru 51345 points
    Okay, it looks like the schematic for the dock is under

    \controlSUITE\development_kits\~ExperimentersKits\120or180pin_HSEC_DockingStn-HWdevPkg_v1_1\R4_1

    Whitney
  • 0 in reply to Whitney Dewey
    Intellectual 280 points
    Thank you. Once I reinstalled controlSUITE I was able to access the schematic.