• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 79 subscribers
  • Views 572 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

MSP430F5529: MSP430: Error initializing emulator: No USB FET was found

MSP430F5529: Error initializing emulator: No USB FET was found

Saravan Sakthivel
Prodigy 10 points

Part Number: MSP430F5438

Tool/software:

Even after PC identifies the board, in CCS the NO USB FET error shows up while I try to run any program to the processor.

**Attention** This is a public forum