• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 78 subscribers
  • Views 163 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR6043: EVM430-FR6043

Viktor Grytsenko
Expert 1175 points
Part Number: MSP430FR6043
Other Parts Discussed in Thread: EVM430-FR6043,

Tool/software:

Hello all.
I am new in MSP430.
I am working with the EVM430-FR6043 for create own gas meter.
The USS program works accurately with the EVM430-FR6043 and a our pair of piezoelectric transducers.
Now I want to use the GPIO outputs of the MSP430FR6043 microcontroller on the EVM430-FR6043 board to control my additional equipment.

Is there a standard ability to access my own codes in the MSP430FR6043 microcontroller program from the USS program?

Thank you.
Best regards,
Viktor.

  • 0
    TI__Mastermind 39375 points

    Hi Viktor,

    I do not understand your question. 

    And yes, you can add your own code in the gas meter demo project to control your additional equipment. 

    Best regards,

    Cash Hao

**Attention** This is a public forum