MSP-GANG: MSP430

Nabila Patel

Part Number: MSP-GANG
Other Parts Discussed in Thread: MSP-FET

Tool/software:

Hi, I am using MSP GANG programmer and it keeps failing while I am doing any Read, program any operation also error massage is bellow: eading Label ...Done
Reading Label ...Done
Openning target...............
2 :
ERROR 23: MCU device initialization failed.
Failed
ERROR 23: MCU device initialization failed.
Closing target.. 0 : Finished
ERROR 23: MCU device initialization failed.

Apart from that, I did self test it has 3 errors.

Guide me further. Coz before it was working.

over 1 year ago

0 Nabila Patel over 1 year ago

Prodigy 40 points

0 Cash Hao11 over 1 year ago in reply to Nabila Patel

TI__Mastermind 46765 points

Hi,

What are the three errors in the self test? I could not see it in these figures.

Best regards,

Cash Hao

0 Nabila Patel over 1 year ago in reply to Cash Hao11

Prodigy 40 points

Now, the self test is passed but I am getting error in program. I am unable to load program from image file, It can not read, verify, program, or Go function its giving me fail

0 Cash Hao11 over 1 year ago in reply to Nabila Patel

TI__Mastermind 46765 points

Hi,

If the hardware connection is correct. Then do you have another programer on hand like a MSP-FET to test. It can confirm whether the issue is coming from the MCU side or the programmer side.

Best regards,

Cash Hao