• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 78 subscribers
  • Views 342 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP-GANG: MSP Gang Programmer | Error 23: MCU device initialization failed

Shubham Wader
Prodigy 20 points
Part Number: MSP-GANG
Other Parts Discussed in Thread: MSPM0G3507, MSPM0G1506

Tool/software:

I am trying to program MSP(MSPM0G1506 / MSPM0G3507) devices with MSP Gang Programmer.
I am unable to program/erase/read target devices. Getting an error of MCU device initialization failed.
Please help me to resolve this.
Attaching the snapshot of desktop application's version info and error window.
 

  • 0
    TI__Genius 16955 points

    Hi Shubham,

    It looks like the hardware connection error. Please double check with this.

    If the error insists, please share what you connection in your board with some picture or simplified schematic diagram.

    B.R.

    Sal

  • 0 in reply to Sal Ye
    Prodigy 20 points

    Hello 
    The connection between Gang programmer jtag and target swd(single/serial wire debug) connector is as below,

  • 0 in reply to Shubham Wader
    TI__Genius 16955 points

    Hi Shubham,

    Two sugegstions here:

    1. Could try connect RST to device NRST pin.

    2. Please confirm whether PIN1 of your MSPGANG is reversed.

    I verified with the MSPGANG board it could work with your firmware version.

    If the error persisit, please run the self test and check whether it has error.

    B.R.

    Sal

**Attention** This is a public forum