This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I have the same problem, my programmer's serial number is very close - 1911-0466.
How can I get this special program?
Hi,
Can you help me understand what the same problem you are referring to is here?
BR,
Leo
HI,Leo
Sorry,
I use MSP GANG Elprotronics programmer, and constantly getting "ERROR 10: CRC Access key. Key corrupted. Access to programmer is blocked." even when target chip is not connected.
Have installed latest software (v1.03.03.00), Programmer SN: 19110466.
I see the same problem described here: https://e2e.ti.com/support/microcontrollers/msp430/f/166/t/886046?tisearch=e2e-sitesearch&keymatch=MSP-GANG
But it is not clear where to get recommended Elprotronics software to update label key.
Are there any solutions?
tamura
Hi Tamura,
You have to contact Elprotronics and ask them for this software.
BR,
Leo
**Attention** This is a public forum