MSP430F5419A: Need C-GANG .a43 support

Zahid

Part Number: MSP430F5419A
Other Parts Discussed in Thread: C-GANG

Downloaded the GangPro-ARM.zip from https://www.ti.com/tool/C-GANG
to program some MSP430 devices.

The name seems misleading as it supports non-ARM MSP430 devices.

Also IAR outputs .a43 and this tool does not have support, please add support for next release.

Let us know if there's a recommended tool to replace the MSP-GANG Programmer: (www.ti.com/.../MSP-GANG) FYI link is broken.

2 months ago

0 Brian Lee 2 months ago

TI__Expert 7380 points

Hi Zahid,

C-Gang is the recommended replacement for the MSP-GANG. The C-GANG and GangPro-X software supports MSP430 and MSPM0 devices, including the one you have specified in this thread:

Please reach out to Elprotronic directly for additional support with .a43.

Best Regards,
Brian

0 zrno soli 2 months ago

Guru 34973 points

Zahid said:
Also IAR outputs .a43 and this tool does not have support, please add support for next release.

IAR can generate additional outputs, like binary in hex or ti txt format.

Project - Options - Output Converter - Generate additional output and select output format

0 David Schultz 2 months ago in reply to zrno soli

Guru 26185 points

.a43 is Intel hex.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430F5419A: Need C-GANG .a43 support