• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 78 subscribers
  • Views 693 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC430F5137 - Error: Security Fuse has been blow - how to erase BSL

Saeid Yazdani
Prodigy 40 points
Other Parts Discussed in Thread: CC430F5137

Hi all,

I recently started developing for CC430F5137. I have an Olimex MSP430-CCRF developement board and TI MSP-FET430UIF debugger. After uploading a program on the developement board, it is not possible to upload new programs or debug the old program on the chip, due to the "Security Fuse has been blow".

I searched around and it seems that maybe because of the problem in the program that I created, debugger can not attach itself to it. I heard that clearing the BSL of the chip might cure the problem. Can someone please tell me what can I do in this case, and how can I erase the BSL so I can continue using the developement board?

**Attention** This is a public forum