MSP430 BOOKS

"MSP430 STATE MACHINE PROGRAMMING"

by Tom Baugh

is one.

Anthony Pontikakis said:

I want to know if there is a useful MSP430 mictocontrollers book

with many C Code examples.

How helpful are these online resources?

• Texas Instruments Wiki > Category:MSP430 Training
• MSP430Ware
• Code Composer Studio v5.5 for MSP430 User's Guide
• Energia
• Texas Instruments Wiki > Grace Quick Start Guide
• Texas Instruments Wiki > ULP Advisor
• TI Home > Microcontrollers (MCU) > MCU Application Notes
• TI Home > Microcontrollers (MCU) > MCU White Papers

 Here's a book

TITLE: Microcontroller Programming and Interfacing: Texas Instruments Msp430
by Pack, Daniel J. And Barrett, Steven
ISBN: 1608-45713-3
ISBN 13: 978-1608-45713-7
Publisher: Morgan & Claypool Publishers
Publish Date: 2011-06-30
Binding: Paperback
List Price: USD 50.00

Anthony Pontikakis said:

I want to know if there is a useful MSP430 mictocontrollers book

I doubt that any book contains significantly more information than one could get or deduct from those two. There might be ideas, explanations etc. But (writing on an MSP book myself) I know that all of this could be derived from these two resources by a skilled engineer.

I have found the book below very useful:

MSP430 Microcontroller Basics by John H. Davies

The book describes the concepts and the peripherals very well and includes many examples. I highly recommed it.

Jens-Michael Gross said:

Starting with the users guide (a 'book' most people seem to avoid like the devil avoids holy water) and the device datasheets (another one that is regularly ignored)

I doubt that any book contains significantly more information than one could get or deduct from those two.

Does automobile service manual contains any driving instructions? Here I mean that hardware guide does not explain applications where particular hardware can be used for..

Ilmars said:

Does automobile service manual contains any driving instructions?

Of course the guide doesn't explain applications. That would be half-way to providing a complete solution (like the 'I bought this MSP, now give me the code for my project' forum posts).

However, the original post did begin with "I'm new', so the first thing someone should read are the users guides. Those who start with a collection of half-baked example codes won't ever get anywhere but into this forum, calling for help (as they don't really understand what their sample codes are doing).

I've seen books full of nice C/C++ programming tricks. Without ever looking into K&R or such, you'll never understand how they work, or go beyond simply reproducing them. Same for hardware (of any kind).
Start with the general and then develop the specific. And you don't need any sample books.

Jens-Michael Gross said:

And you don't need any sample books.

Anyway - before deciding to not have any sample books, please check this one:

MSP430 Family
Mixed-Signal Microcontroller Application Reports

http://www.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=slaa024