how to use CCS6 to get into debug mode with my customize BSL project and a Application project?

erik lee2

Genius 3060 points

Other Parts Discussed in Thread: MSP430F5152

i got 2 individul project, they are a customize bsl project and app project. My target device is MSP430F5152.

the customize bsl is located from memory 0xc000, and my app code is located from memory 0xc800.

how to use CCS6 to combine these 2 projects to burn into MSP430F5152 and get into debug mode?

over 9 years ago

0 Sean Huang15 over 9 years ago

TI__Expert 4215 points

Hi Erik,

Merging two projects mainly involves copying over the variables and functions from one project to another, also making sure the ISRs are placed in the linker file and memory allocations are declared properly in terms of BSL and App code. The link below has instructions for placing variables in specific memory locations.
processors.wiki.ti.com/.../Placing_Variables_in_Specific_Memory_Location_-_MSP430

Sincerely,
Sean

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

how to use CCS6 to get into debug mode with my customize BSL project and a Application project?