MSP432P401R: I2C spec testing for tHIGH,tLOW and tBUF

Janet Shen

Part Number: MSP432P401R

Dear Champs,

For MSP432P401 I2C spec on datasheet on 5.25.10 eUSCI ection, P85, we could not find the parameter data on tHIGH, tLOW, tBUF.

Could you kindly provide these spec for tHIGH, tLOW and tBUF?

If you have any concern, please feel free to let me know.

Thanks a lot.

over 6 years ago

0 Bob Landers over 6 years ago

TI__Expert 8510 points

Janet,
I'll forward the question on to the design team to see if we have those specs and in what form.
-Bob L.

0 Bob Landers over 6 years ago in reply to Bob Landers

TI__Expert 8510 points

Janet,
just to document our private message traffic for E2E, the above tables for setup/hold times for I2C definitely look off- This looks like an error in the datasheet. I'll provide an update here once we've had a response from the design team.
-Bob L.

0 Janet Shen over 6 years ago in reply to Bob Landers

TI__Expert 7795 points

Dear Bob,

Got it, will wait for design team's feedback and let us know if any update.
Thanks a lot.

**Attention** This is a public forum

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP432P401R: I2C spec testing for tHIGH,tLOW and tBUF