CCS/MSP432P401R: need help in converting the LCD libraries from arduino to MSP432P401R launch pad.

r venkatesh

Part Number: MSP432P401R
Other Parts Discussed in Thread: ENERGIA

Tool/software: Code Composer Studio

need help in converting the LCD libraries supporting arduino to MSP432P401R launch pad in CCS. the display is a 3.5 inch waveshare touch shield that is supported by arduino ("https://www.waveshare.com/wiki/3.5inch_TFT_Touch_Shield") (files are attached below) . i tried opening the below project using energia but did not work as expected, may im doing it wrong cause im completely new to this . So i kindly request someone to help me out in converting these libraries and guide me on what to do next.https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/166/3.5inch_5F00_TFT_5F00_Touch_5F00_Shield_5F00_Code.7zLCD_Driver.h

over 7 years ago

0 Sai Reddy over 7 years ago

TI__Mastermind 22640 points

Hello Venkatesh,

Porting the Ardunio library to SimpleLink SDK is going to be time consuming and we won't be able to support that on this forum.

As noted in another post by you, the support for most displays can be added to the Graphics Library that is part of the SimpleLink MSP432 SDK. The existing example with the Kintec Boosterpack display (www.ti.com/.../BOOSTXL-K350QVG-S1) can be used as a reference. If you want to go down this route then we can provide guidance but won't be able to develop code or test it.

If you are interested in using Energia then porting an Ardunio library and need help please post on the following forum as they are experts on this topic: forum.43oh.com/.../

Thanks,
Sai

0 r venkatesh over 7 years ago in reply to Sai Reddy

Intellectual 770 points

Thank you for the reply.
I figured out how to make it work.

0 Sai Reddy over 7 years ago in reply to r venkatesh

TI__Mastermind 22640 points

Hello Venkatesh,

I am glad you were able to come up with a solution. I understand that it is extra work, but if possible could you post your solution here so that it will help other forum users?

Thanks,
Sai

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP432P401R: need help in converting the LCD libraries from arduino to MSP432P401R launch pad.