CCS/MSP-EXP432E401Y: MSP432E4 LaunchPad EnergyTrace support?

Philip Baltz1

Part Number: MSP-EXP432E401Y
Other Parts Discussed in Thread: ENERGYTRACE, , TMDSEMU110-U, MSP-FET

Tool/software: Code Composer Studio

Does the MSP432E3 LaunchPad support EnergyTrace? I can't find the MSP432E4 listed in the supported processors, but I'm a little surprised if it doesn't.

-phil

over 6 years ago

0 James Evans over 6 years ago

TI__Mastermind 49692 points

Hi Phil,

I searched the forum and found the following thread.

CCS/MSP-EXP432E401Y: energy trace not working on mac

Basically, the MSP-EXP432E401Y LaunchPad does not natively support EnergyTrace. However, you could possibly use the MSP-FET debugger with the adapter for MSP432 MCUs, the XDS110-ET found on the MSP432P4 LaunchPads, or the standalone XDS110 (TMDSEMU110-U) + EnergyTrace HDR accessory (TMDSEMU110-ETH).

Just be mindful about the max output current of 100 mA.

EnergyTrace with the new XDS110 Debug Probe

Regards,

James

0 Philip Baltz1 over 6 years ago in reply to James Evans

Intellectual 820 points

James,

Thank you.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP-EXP432E401Y: MSP432E4 LaunchPad EnergyTrace support?