CCS/MSP430FR6043: the placement of the transducer

Susan Yang

Genius 9955 points

Part Number: MSP430FR6043

Tool/software: Code Composer Studio

Dear team

https://e2e.ti.com/support/microcontrollers/msp430/f/166/t/868443

"However, the placement of the transducer will also affect the maximum & minimum flow rate."

Please show me more details about the placement of the transducer. Or do we need to offset the transducer a little bit?

SUSAN

over 5 years ago

0 Srinivas Lingam over 5 years ago

TI__Expert 7365 points

Hi Susan,

I think the reply to that thread was just indicating that the flow rate is dependent on the distance (L) between the transducers. You can see the dependency between the length L, Delta Time of Flight and the flow rate in equation 6 of the application note https://www.ti.com/lit/pdf/slaa889.

Srinivas

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430FR6043: the placement of the transducer