DRV8353RH-EVM: test report for max power handling of this board

Mahendra Patel1

Expert 3560 points

Part Number: DRV8353RH-EVM

Hello Team,

My customer is curious to know, if they can use the DRV8353RH-EVM board for 500W output power with 48V input.

Do we have some kind of test report for this board with operation upto 15A continuous output current?

Is this board rated to handle 15RMS current on each phase continuously?

regards,

Mahendra

over 3 years ago

+1 Aaron Barrera over 3 years ago

TI__Mastermind 26046 points

Hi Mahendra,

This EVM is described on the product tool page as capable of 15 A continuous / 20 A peak H-bridge output current.

The DRV835x is rated up to 100-V max, and the onboard FETs onboard are rated for 100A of continuous drain current, and the connectors are rated for 32-A, so it appears that 15A RMS current should be fine.

Thanks,
Aaron

0 Matt Hein over 3 years ago in reply to Aaron Barrera

TI__Mastermind 21805 points

Hi Mahendra,

Do you need any further assistance on this thread?

Thanks,

Matt

0 Mahendra Patel1 over 3 years ago in reply to Matt Hein

TI__Expert 3560 points

Hi Matt,

I communicated Aaron's comment to customer and we can close this thread now.

Thank you.

-Mahendra

0 Matt Hein over 3 years ago in reply to Mahendra Patel1

TI__Mastermind 21805 points

Thanks Mahendra

Motor drivers

Motor drivers forum

DRV8353RH-EVM: test report for max power handling of this board