This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.


Part Number: DRV10987EVM
Other Parts Discussed in Thread: DRV10987

Hello everybody,

I'm working on DRV10987 and its relative GUI, but I'have an issue when I tried to put motor parameters like phase-center tap resistance and Kt with a decimal value for exaple 1.6 Ohm and 6.6 mV/Hz. The GUI approximates these values with out decimal.

Inside tuning guide I saw that it is possible to put decimal value, how can I solve ?

Thank you

  • Hi Michele,

    Thanks for posting your question in MD forum.

    This sometimes happens when the local language keyboard settings interact with the GUI. I’m assuming you are using Windows 10 as your operating system. Can you open windows settings, go to "Time and language", select “Region”, select Regional format to "English (United States)", restart the program, and see if you are able to enter decimals? See the screenshot below.

    Also, in windows settings, go to language settings and change the language to English (United States) as shown below.