• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 187 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DRV8434SEVM: DRV8434SEVM

DRV8434SEVM: DRV8434S motor driving example

sudhanshu mehta
Prodigy 30 points
Part Number: DRV8434SEVM
Other Parts Discussed in Thread: DRV8434S

I am working with DRV8434S chip. I want to write its driver.

Any simple example would be helpful. any example other than firmware provided with GUI will be good.

I need to rotate motor with SPI.

Thanks

Sudhanshu

  • 0
    TI__Mastermind 37683 points

    Hi Sudhanshu,

    If all you need to do is to write SPI commands to the driver on the EVM, then I recommend using a serial communication board like this one. It's cheap and it comes with a free and open source GUI to write SPI commands to the driver. You don't have to write any code to get it working.

    We don't have any example firmware aside from the one provide in the DRV8434S tool page on ti.com